Hydrovane HR07 Compressor
The Hydrovane HR07 compressor range is an alternative to the HV07 models from Hydrovane, with the regeneration series boasting several energy saving features.
Operation & service manual. This manual contains important safety information and should always be available to those personnel operating this unit. Read, understand and retain all instructions before operating this equipment to prevent injury or equipment damage. Mcguire air compressors inc 1. Low noise rotary vane compressor Hydrovane USA hydrovane compressor manual pdf - Full Version by GlurgetredVug 2015-03-06: 1,494.65 KB: 311: hydrovane compressor manual pdf - Fast Download by Hydrovane responded by introducing a range of air compressors, which were enclosed offering very low noise levels. This range covered 10hp - 100hp.
Hydrovane HR compressor technology is simple, robust and reliable. The versatility of the Hydrovane HR range of compressors makes it the first choice for a wide range of OEM applications and manufacturers.
Highest efficiency IE3 motors are fitted as standard and REVS reduced energy venting system allow for lower off-load power consumption.
Direct drive, allows direct coupling to electric motors, hydraulic motors, petrol and diesel engines and PTO drives.
Hydrovane HR compressors are the most efficient air compressors available in a 4-7kW power range with record specific performance figures.
1.05
10
Low Noise and Vibration Levels
Direct drive
Slow speed
Easy to Maintain
Made in the UK
DA Finance
Interested in leasing or renting equipment?
Direct Air can help your business find the most cost-effective solution to finance your compressor and downstream equipment.
Technology is constantly improving and for everything that needs to be replaced, there's always leasing!
Hydrovane HR07PR Compressor
1.05
10
Open frame
Low Noise and Vibration Levels
Direct drive
Slow speed
Easy to Maintain
Made in the UK
The Hydrovane HR Regeneration extends to the entry level open compressor with entirely new 5.5kw and 7.5kw open receiver mounted packages.
Retaining the horizontal format but utilising the same efficient HR compressor design. It's an ideal solution where a fully enclosed unit isn't required.
Hydrovane HR07PR key features:
• Pro-controller as standard.
• REVS reduced energy venting system ensuring compressor cannot start when pressurised.
• Common compressor design with the same easy-change spin-on oil filter and separator, reducing maintenance time.
• Common IE3 highest efficiency motor.
• Extended warranties are now available on these models.
Hydrovane HR07ER Compressor
1.05
Hydrovane 330m Compressor Manual For Sale
10
Receiver Mounted
Low Noise and Vibration Levels
Direct drive
Slow speed
Easy to Maintain
Made in the UK
Hydrovane HR07ED Compressor
1.05
10
Refrigerant Dryer
Low Noise and Vibration Levels
Direct drive
Slow speed
Easy to Maintain
Made in the UK
The Hydrovane HR07ED compressor replaces the HV07 ACED model and features the latest FHS refrigerant air dryers capable of generating a dew point of +3°C
Hydrovane HR07ERD Compressor
1.05
10
Refrigerant Dryer
Hydrovane Hv04 Compressor Manual
Air Receiver
Low Noise and Vibration Levels
Direct drive
Slow speed
Easy to Maintain
Made in the UK
Hydrovane Air Compressor Manual
The Hydrovane HR07ERD compressor replaces the HV07 AERD model and features the latest FHS refrigerant air dryers capable of generating a dew point of +3°C.
Horizontal Open Fixed Speed
The Hydrovane HV (PURS / PUTS) series of horizontal open format (unenclosed) fixed speed compressors are engineered to meet the most stringent of specifications. The range is designed for a wide variety of light industry applications including automobile, car body repair shops, dentistry, packaging and machine tools. Their modular design and compact size also make the compressor componrents ideal for OEM applications.
The 1.1 and 2.2 kW models won the Design Council award combining simplicity of operation with proven reliability.
A 12 month standard warranty is available on the HV 1.1 to 7.5 kW Hydrovane standard product range.
HV Series 1.5-10 HP (1.1-7.5 kw) - Tripod or Receiver Mounted
- 145 PSI (10 bar)
- 4.2 to 35 CFM (0.12 to 0.99 m³/min)
- Slow Speed: 1450 RPM (1760 @ 60 Hz)
- Low noise levels 62 to 73 dB(A)
- Tripod or receiver mounted
- Continuous run or Start/Stop
- IP55 Electric Motor
- Standard Starter
- Single phase versions up to 3 HP (2.2 kW)
- HV01PURS & HV02PURS - 20 gallon (75 litre) receiver
- HV04PURS, HV05PURS & HV07PURS- 53 gallon (200 litre) receiver
- Direct Drive
50 Hz Model Range
Model | Part Number | Motor Power | Starter | Voltage | Hz | Speed | Delivery Pressure | Volume |
---|---|---|---|---|---|---|---|---|
Single Phase, 145 PSI | ||||||||
HV01(PUTS) | 501PUTS10-2415D400 | 1.1 kW | DOL | 1ph/240V | 50 Hz | 1,450 rpm | 145.0 psi (10.0 bar) | 4.2 cfm (0.12 m³/min) |
HV02(PUTS) | 502PUTS10-2415D400 | 2.2 kW | DOL | 1ph/240V | 50 Hz | 2,900 rpm | 145.0 psi (10.0 bar) | 8.1 cfm (0.23 m³/min) |
HV01(PURS) | 501PUTS10-2415D400 | 1.1 kW | DOL | 1ph/240V | 50 Hz | 1,450 rpm | 145.0 psi (10.0 bar) | 4.2 cfm (0.12 m³/min) |
HV02(PURS) | 502PUTS10-2415D400 | 2.2 kW | DOL | 1ph/240V | 50 Hz | 2,900 rpm | 145.0 psi (10.0 bar) | 8.1 cfm (0.23 m³/min) |
3 Phase, 145 PSI | ||||||||
HV01(PUTS) | 501PUTS10-2415D400 | 1.1 kW | DOL | 3ph/400V | 50 Hz | 1,450 rpm | 145.0 psi (10.0 bar) | 4.2 cfm (0.12 m³/min) |
HV01(PURS) | 501PUTS10-2415D400 | 1.1 kW | DOL | 3ph/400V | 50 Hz | 1,450 rpm | 145.0 psi (10.0 bar) | 4.2 cfm (0.12 m³/min) |
HV02(PUTS) | 502PUTS10-2415D400 | 2.2 kW | DOL | 1ph/400V | 50 Hz | 2,900 rpm | 145.0 psi (10.0 bar) | 8.1 cfm (0.23 m³/min) |
HV02(PURS) | 502PUTS10-2415D400 | 2.2 kW | DOL | 1ph/400V | 50 Hz | 2,900 rpm | 145.0 psi (10.0 bar) | 8.1 cfm (0.23 m³/min) |
HV04RM(PURS) | 504PURS10-4035D200 | 4.0 kW | DOL | 3ph/400V | 50 Hz | 1,450 rpm | 145.0 psi (10.0 bar) | 20.1 cfm (0.57 m³/min) |
HV05RM(PURS) | 705PURS10-4035S001 | 5.0 kW | SD | 3ph/400V | 50 Hz | 1,450 rpm | 145.0 psi (10.0 bar) | 25.1 cfm (0.71 m³/min) |
HV07RM(PURS) | 707PURS10-4035S001 | 7.5 kW | SD | 3ph/400V | 50 Hz | 1,450 rpm | 145.0 psi (10.0 bar) | 35.0 cfm (0.99 m³/min) |
The Hydrovane HV (PUAS/PEAS) series of horizontal open formant (unenclosed) fixed speed compressors are ideal for heavy duty general purpose applications, where reduced footprint and low noise levels are not key specification criteria.
Hydrovane Air Compressor Service Manual
This horizontal open format compressor range offers an alternative solution to the vertical enclosed range (ACE). The range also features spin-off / spin-on maintenance items i.e. separators and oil filters for easy maintenance.
The HV30 to HV45 (PEAS) is available with IP55 motors, upon special request (Non-Standard Product - NSP).
An industry leading Advance 10 year extended warranty is available on all Hydrovane standard products (Unless specified).
HV Series 15-60 HP (11-45 kW)
- 101, 116 and 145 PSI (7, 8 and 10 bar)
- 24 to 259 CFM (0.68 to 7.33 m³/min)
- Slow Speed: 1450 RPM
- Low noise levels - 75 to 85 dB(A)
- Full Air Intake Modulation
- Automatic Start/Stop
- Over-temperature protection
- Direct Drive
- Remote Air Intake Filtration
- Aftercooler (Air)
50 Hz Model Range
Model | Part Number | Motor Power | Starter | Voltage | Hz | Speed | Delivery Pressure | Volume |
---|---|---|---|---|---|---|---|---|
3 Phase, 145 PSI | ||||||||
HV11(PEAS) | V11PEAS10-4035S100 | 15 HP (11.0 kW) | SD | 3ph/400V | 50 Hz | 1,450 rpm | 145.0 psi (10.0 bar) | 49.8 cfm (1.41 m³/min) |
HV15(PEAS) | V15PEAS10-4035S100 | 20 HP (15.0 kW) | SD | 3ph/400V | 50 Hz | 1,450 rpm | 145.0 psi (10.0 bar) | 71.0 cfm (2.01 m³/min) |
HV18(PEAS) | V18PEAS10-4035S100 | 25 HP (18.5 kW) | SD | 3ph/400V | 50 Hz | 1,450 rpm | 145.0 psi (10.0 bar) | 90.1 cfm (2.55 m³/min) |
HV22(PEAS) | V22PEAS10-4035S100 | 29 HP (22.0 kW) | SD | 3ph/400V | 50 Hz | 1,450 rpm | 145.0 psi (10.0 bar) | 104.5 cfm (2.96 m³/min) |
HV30(PEAS) | V30PEAS10-4035S100 | 40 HP (30.0 kW) | SD | 3ph/400V | 50 Hz | 1,450 rpm | 145.0 psi (10.0 bar) | 152.2 cfm (4.31 m³/min) |
HV37(PEAS) | V37PEAS10-4035S100 | 50 HP (37.0 kW) | SD | 3ph/400V | 50 Hz | 1,450 rpm | 145.0 psi (10.0 bar) | 179.0 cfm (5.07 m³/min) |
HV45(PEAS) | V45PEAS10-4035S100 | 60 HP (45.0 kW) | SD | 3ph/400V | 50 Hz | 1,450 rpm | 145.0 psi (10.0 bar) | 231.0 cfm (6.54 m³/min) |
3 Phase, 102 PSI and 116 PSI | ||||||||
HV04(PUAS) | 504PUAS07-4035D210 | 5 HP (4.0 kW) | DOL | 3ph/400V | 50 Hz | 1,450 rpm | 101.5 psi (7.0 bar) | 24.0 cfm (0.68 m³/min) |
HV11(PEAS) | V11PEAS08-4035S100 | 15 HP (11.0 kW) | SD | 3ph/400V | 50 Hz | 1,450 rpm | 116.0 psi (8.0 bar) | 57.6 cfm (1.63 m³/min) |
HV15(PEAS) | V15PEAS08-4035S100 | 20 HP (15.0 kW) | SD | 3ph/400V | 50 Hz | 1,450 rpm | 116.0 psi (8.0 bar) | 78.0 cfm (2.21 m³/min) |
HV18(PEAS) | V18PEAS08-4035S100 | 25 HP (18.5 kW) | SD | 3ph/400V | 50 Hz | 1,450 rpm | 116.0 psi (8.0 bar) | 101.7 cfm (2.88 m³/min) |
HV22(PEAS) | V22PEAS08-4035S100 | 29 HP (22.0 kW) | SD | 3ph/400V | 50 Hz | 1,450 rpm | 116.0 psi (8.0 bar) | 127.1 cfm (3.60 m³/min) |
HV30(PEAS) | V30PEAS08-4035S100 | 40 HP (30.0 kW) | SD | 3ph/400V | 50 Hz | 1,450 rpm | 116.0 psi (8.0 bar) | 176.6 cfm (5.00 m³/min) |
HV37(PEAS) | V37PEAS08-4035S100 | 50 HP (37.0 kW) | SD | 3ph/400V | 50 Hz | 1,450 rpm | 116.0 psi (8.0 bar) | 210.1 cfm (5.95 m³/min) |
HV45(PEAS) | V45PEAS08-4035S100 | 60 HP (45.0 kW) | SD | 3ph/400V | 50 Hz | 1,450 rpm | 116.0 psi (8.0 bar)i | 258.9 cfm (7.33 m³/min) |
Visit our Catalogs and Downloads Center to view catalogs, manuals, parts lists and more.